Rising humidity: The simple and cost-effective DIY method for permanent wall repair
Step 1: Clean the Surface Before you begin, ensure the wall surface is clean and free of dirt, mold, or old mortar residue. Thoroughly clean the wall with a stiff brush and cleaning agent. Allow the surface to dry completely before proceeding to the next step.
Step 2: Prepare the Mortar Prepare the water-resistant or moisture-resistant mortar according to the manufacturer’s instructions. Be sure to wear protective gloves during this step to avoid skin irritation. Mix the mortar until smooth and lump-free.
Step 3: Applying the mortar. Use a trowel to spread the mortar evenly over the wall surface affected by rising damp. Make sure to completely cover the affected areas to create a protective layer that prevents water from penetrating through the wall’s pores.
Step 4: Finishing Once the grout is applied, smooth the surface with a brush and remove any unevenness. Allow the grout to dry completely according to the manufacturer’s instructions, usually between 24 and 48 hours.
Rising damp is a common problem in many homes, especially older or poorly constructed ones.
This occurs when groundwater flows upward through walls, causing stains, mold, and structural damage over time.
Fortunately, there are DIY methods that can help solve this annoying problem without resorting to expensive professional intervention.
In this guide, we’ll show you the easiest and quickest way to remove rising damp from walls.
